New Century Forging Co., Ltd

New Century Forging Co., Ltd

86-351-5270488

New Century Forging Co., Ltd
Review
  • “Api 6a Material Class quality exceeds expectations. The packing is pretty, EVERYTHING work well.”
    Mr.mr.eric Lokken
    Emcon Emanation Control Limite
  • “The Api 6a Material Class is at excellent packaging.”
    Vivian Cantila
    3TreesandaMapPR
  • “Happy with this Api 6a Material Class .”
    Ravi Swamy
    "ЛОГИСТИКТРАНС" ОБЩЕСТВО С ОГРАНИЧЕННОЙ ОТВЕТСТВЕННОСТЬЮ
  • “The salesman was extremely communicative and very easy to work with. Really one of the best sellers, if something isn’t right he will make it right in a short time. Shipped fast, the Api 6a Material Class arrived early, easy to contact. A+ overall.”
    Sandeep Jain
    frank murken products
  • “this is definitely the best NC to buy.”
    Andreas Weidner
    1a-network

Api 6a Material Class

- manufacturer, factory, supplier from China

(Total 12 Products for Api 6a Material Class)

  • API 6A 6B and 6BX flanges

    API 6A 6B and 6BX flanges

    • Brand: NC
    • Packaging: Sea-worthy plywood case
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Welding neck flanges are most widely used flanges by welding pipe to its neck part, the welding neck flanges' inside diameter is designed to match with pipe's inside diameter as marked SCH STD/80/160...or special wall thickness. Our screw press machines can produce welding neck from 2" to 6" from 150lb to 2500lb, make...

    Contact Now

  • A515 B16.48 Steel Line Blanks Spacer

    A515 B16.48 Steel Line Blanks Spacer

    • Brand: NC
    • Packaging: Sea-worthy plywood case
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Standard ASME FLANGE B16.48 or API 590 refers to Steel line blanks, there are 3 types: Figure 8 blanks, paddle Spacer and Blanks. They can be produced by forging or by plate-cutting. Spacer and Blank usually have tie bar for lifting or handling easily. Spectacle and line blind flanges are similar to a blind flange but...

    Contact Now

  • API 6A Stainless Steel Orifice Flange

    API 6A Stainless Steel Orifice Flange

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Duplex stainless steel Orifice flange also referred to as ORFF in its abbreviated form, are components used for metering the volumetric flow rate of liquids and gasses that are being transported through a pipe. When two Orifice Flange Jis 16k are used together, they are known an orifice flange union. The range of...

    Contact Now

  • ASME B16.47 Series B Flange

    ASME B16.47 Series B Flange

    • Brand: NC
    • Packaging: PLYWOOD CASE
    • Supply Ability: 12,000TON/YEAR
    • Min. Order: 1 Ton

    ASME flange(American National Standards Institute) include ASME B 16.5 flange, ASME B16.47- A flange, ASME B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange(loose flange), socket welded flange, Orifice Flanges, long weld neck flange...

    Contact Now

  • API 1000PSI WELDING NECK RTJ FLANGE

    API 1000PSI WELDING NECK RTJ FLANGE

    • Brand: NC
    • Packaging: PLYWOOD CASE
    • Supply Ability: 12,000TON/YEAR
    • Min. Order: 1 Ton

    The flange standards API 6A and ASME/ANSI B16.5 are similar dimensionally, but the API 6A flanges are rated for higher pressures. The difference between ASME/ANSI and API flanges are the fabrication material and the higher rated API operating pressure. The industrial processes come into die forging,and machining,we...

    Contact Now

  • API STANDARD FLANGE CARBON STEEL

    API STANDARD FLANGE CARBON STEEL

    • Brand: NC
    • Packaging: PLYWOOD CASE
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    The flange standards API 6A Flange and ASME B16.5 Flange are similar dimensionally, but the API 6A flange are rated for higher pressures. The difference between ASME Flange and API 6A Flange is the fabrication material and the higher rated API operating pressure. ASME Flange include ASME B16.5 Flange, ASME B16.47- A...

    Contact Now

  • API  Welding neck flange

    API Welding neck flange

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Steel Flange standard API 6A Flange and ASME B16.5 Flange are similar dimensionally - but the API flanges are rated for higher pressures. The difference between ASME Flange and API 6A Flange is the fabrication material and the higher rated API operating pressure. ASME Flange include B16.5 Flange, B16.47-A Flange,...

    Contact Now

  • 12" blind flange foreign

    12" blind flange foreign

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    12" blind flange foreign STEEL FLANGE ASME FLANGE B16.5 FLANGE A Blind Flange has no bore, and is used to close ends of piping systems. A blind flange also permits easy access to a line ones it has been sealed. The blind flange is sometimes machined to accept a pipe of the nominal Size to which reduction is being...

    Contact Now

  • Hot forging products of flange

    Hot forging products of flange

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Hot forging products of flange The compact flange similar to the rotating ring flange is a two-piece construction flange, which is widely used in offshore pipelines, offshore industrial applications, and onshore and subsea applications. Its double sealing effect can prevent the release of hydrocarbons, thereby solving...

    Contact Now

  • ANSI B16.47 Class 1500 blind flanges

    ANSI B16.47 Class 1500 blind flanges

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    ANSI B16.47 Class 1500 blind flanges A Blind Flange has no bore, and is used to close ends of piping systems. A blind flange also permits easy access to a line ones it has been sealed. The blind flange is sometimes machined to accept a pipe of the nominal Size to which reduction is being made. The reduction can be...

    Contact Now

  • Class 600 alloy steel slip-op flange

    Class 600 alloy steel slip-op flange

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Class 600 alloy steel slip-op flan F304 ally steel flange Alloy steel flange material 1. Manufacturing standards: ASME B16.5; B16.47A, B 2. Pressure rating: 150LB~2500LB; 3. Product material: F304, F316 4. Production process: blanking-forging-heat treatment-machining-surface treatment-plastic box packaging 5. Product...

    Contact Now

  • Superior quality welding neck (WN) forging flange

    Superior quality welding neck (WN) forging flange

    • Brand: NC
    • Packaging: PLYWOOD CASE
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Superior quality welding neck (WN) forging flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange. This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself. This also reduces high stress concentration at the base of the hub of the weld neck...

    Contact Now

  • Video
  • API 6A 6B and 6BX flanges
  • ASME B16.47 Series B Flange
  • API 1000PSI WELDING NECK RTJ FLANGE
  • API STANDARD FLANGE CARBON STEEL
  • API  Welding neck flange
  • Related Information

High Quality Products

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Home > Api 6a Material Class
Related Products List

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send