New Century Forging Co., Ltd

New Century Forging Co., Ltd

86-351-5270488

New Century Forging Co., Ltd
Review
  • “Good Alloy Steel Flange Lap Joint , though with some problems. However, the seller is active in solving problems for me.”
    Aditya Chaurasia
    sanitek products
  • “We have been looking for a professional and responsible supplier, and finally, I find an excellent Alloy Steel Flange Lap Joint manufacturer like you guys.”
    Kishore Shah
    1A-KFZ-GEBRAUCHTTEILE E. MARZEN UG
  • “The Alloy Steel Flange Lap Joint is at excellent packaging.”
    Ibrahim Hanoglu
    "РУССКО-БАЛТИЙСКИЙ ВАГОННЫЙ ЗАВОД" АКЦИОНЕРНОЕ ОБЩЕСТВО
  • “Came in fast. product is ok.Recommend NC company!”
    Nick Trani
    "ИНЖЕНЕРНО-ТЕХНИЧЕСКИЙ ЭЛЕКТРОКОМПЛЕКС" ОБЩЕСТВО С ОГРАНИЧЕННОЙ ОТВЕТСТВЕННОСТЬЮ
  • “High quality Alloy Steel Flange Lap Joint but a little bit slow delivery as for me.”
    Aina Ogunsakin
    NTOTank

Alloy Steel Flange Lap Joint

- manufacturer, factory, supplier from China

(Total 12 Products for Alloy Steel Flange Lap Joint)

  • Din 10Bar Lap Joint Flange

    Din 10Bar Lap Joint Flange

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    DIN 10bar lap joint flange Lap joint flanges are primarily employed with lap joint stubs, the combined initial cost of the two items being approximately one third higher than that of comparable welding neck flanges. Their pressure holding ability is little, if any, better than that of slip on flanges and the fatigue...

    Contact Now

  • Api Standard Alloy Steel Lap Joint Flanges

    Api Standard Alloy Steel Lap Joint Flanges

    • Brand: NC
    • Packaging: PLIWOOD CASES
    • Supply Ability: 12,000TON/YEAR
    • Min. Order: 1 Ton

    The flange standards API 6A and ASME/ANSI B16.5 have the same dimensions - but the API 6A flanges are rated for higher pressures as indicated below: The industrial processes come into die forging,and machining,we can provide a wide range of flanges,following on standards like ASME B16.5 Flange, ASME B16.47 Flange, DIN...

    Contact Now

  • API forged alloy steel Ring Joint Gasket

    API forged alloy steel Ring Joint Gasket

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    The Ring Type Joint (RTJ) gasket is a forged ring that fits into the machined groove of an RTJ flange. The

    Contact Now

  • Alloy steel lap joint casting flange RF

    Alloy steel lap joint casting flange RF

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Alloy Steel Flange RF A Lap Joint Flange is usually used in conjunction with Lap Joint Stubs. Lap Joint Flanges in carbon or low alloy steel piping systems are best used when frequent dismantling for inspection and cleaning is required. The use of Lap Joint Flanges at points where severe bending stress occurs should...

    Contact Now

  • Galv. Lap Joint Flanges

    Galv. Lap Joint Flanges

    • Brand: NC
    • Packaging: Sea-worthy plywood case
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    ASME Flange include ASME B16.5 Flange, ASME B16.47-A Flange, ASME B16.47-B Flange, this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange), socket welded flange, B16.36 Orifice Flange, long weld neck flange and special flange, sizes from 1/2...

    Contact Now

  • RTJ Weld Neck Flanges

    RTJ Weld Neck Flanges

    • Brand: NC
    • Packaging: Sea-worthy plywood case
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Class 1500 ring joint welding neck flange Ring type joint flanges are typically usded for high pressure projects. They provide a more effective sealing solution to media critical pipeline and pressure vessel infrastructure. Ring joint face is usually for flanges with rating 600#, 900# 1500# 2500# and API flanges The...

    Contact Now

  • Stainless steel lap Joint

    Stainless steel lap Joint

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Stainless steel lap Joint A Lap Joint Flange is usually used in conjunction with Lap Joint Stubs. Lap Joint Flanges in carbon or low alloy steel piping systems are best used when frequent dismantling for inspection and cleaning is required. The use of Lap Joint Flanges at points where severe bending stress occurs...

    Contact Now

  • Customized ANSI B16.5 stainless steel lap joint flanges

    Customized ANSI B16.5 stainless steel lap joint flanges

    • Brand: NC
    • Packaging: PLIWOOD CASES
    • Supply Ability: 12,000TON/YEAR
    • Min. Order: 1 Ton

    Customized ANSI B16.5 stainless steel lap joint flanges STEEL FLANGE ASME FLANGE B16.5 FLANGE The industrial processes come into die forging,and machining,we can provide a wide range of flanges,following on standards like ASME B16.5 Flange, ASME B16.47 Flange, DIN 2573 Slip On Flange, DIN 2631 Welding Neck Flange, JIS...

    Contact Now

  • AWWA stainless steel lap joint flanges

    AWWA stainless steel lap joint flanges

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    This standard covers slip-on and blind flanges for waterworks service in sizes 4" through 144" nominal (100mm through 3600 mm). The industrial processes come into die forging,and machining,we can provide a wide range of slip on weld flanges,following on standards like ASME B16.5 Flange, ASME B16.47 Flange, DIN 2573...

    Contact Now

  • Carbon steel raised face ring type joint flanges

    Carbon steel raised face ring type joint flanges

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Ring type joint flange, abbreviated as RTJF, is a type of flange that uses a metal ring that sits in a hexagonal groove as a gasket to seal the flange pair. The flanges seal when the bolts are tightened and the gasket is compressed into the groove making a metal to metal seal. An RTJ flange usually has a raised face...

    Contact Now

  • ANSI B16.9 Carbon Steel Ring Type Joint Flange

    ANSI B16.9 Carbon Steel Ring Type Joint Flange

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    A Ring type joint flange (RTJ) is a machined metallic ring with a deep groove cut into its face. This groove rests a metal ring which gets compressed when the connecting bolts of the flange are tightened. This compression results in a leak-proof, close-fitting seal on the pipe or connection. The industrial processes...

    Contact Now

  • 900LB Welding Neck RTJ FLANGE

    900LB Welding Neck RTJ FLANGE

    • Brand: NC
    • Packaging: Plywood cases
    • Supply Ability: 20,000Ton/Year
    • Min. Order: 1 Ton

    B16.5 WN RF Flange ASTM A105 Carbon Steel Flange A105 steel flanges have a better mechenical properties It commonly used in pipe and vessels. Ring Type joint flange has a better sealing always used on high pressure flanges. The industrial processes come into die forging,and machining,we can provide a wide range of WN...

    Contact Now

  • Video
  • Din 10Bar Lap Joint Flange
  • Galv. Lap Joint Flanges
  • RTJ Weld Neck Flanges
  • Related Information

High Quality Products

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Home > Alloy Steel Flange Lap Joint
Related Products List

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send