Communicate with Supplier? Supplier
Xing Ms. Xing
What can I do for you?
Contact Supplier
New Century Machinery Co., Ltd

New Century Machinery Co., Ltd

ncflange@163.com

86-351-5270488

New Century Machinery Co., Ltd

Asme B16 5 300lbs Flange - manufacturer, factory, supplier from China

(Total 24 Products for Asme B16 5 300lbs Flange)

  • Blind Flange With 2in National Pipe Tappered NPT

    Blind Flange With 2in National Pipe Tappered NPT

    • Brand: NC

    • Packaging: Sea-worthy plywood case/pallet

    • Supply Ability: 20,000Ton/Year

    • Min. Order: 10 Piece/Pieces

    Blind flange with 1 2 NPT tapped thread these include NPT tapped holes and special threads to allow pressure test connections to be fitted Blind flanges are generally used to blank off the ends of pipe They are also used on similar valves and pressure vessel openings Because they are often located at the ends of...

    Contact Now

  • 2 inch threaded 16# carbon steel RF flange

    2 inch threaded 16# carbon steel RF flange

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    2 inch threaded 16 carbon steel RF flange Threaded flanges are attached to the pipe like any other screwed fittings and may be back welded to seal the joint between pipe and flange Although still available in most sizes and pressure ratings screwed fittings today are used almost exclusively in smaller pipe sizes and...

    Contact Now

  • Carbon welding neck flange

    Carbon welding neck flange

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Carbon welding neck Class 150 carbon steel welding Carbon steel welding flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself This also reduces high stress concentration at the base...

    Contact Now

  • Superior quality welding neck (WN) forging flange

    Superior quality welding neck (WN) forging flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Superior quality welding neck WN forging flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself This also reduces high stress concentration at the base of the hub of the weld neck pipe...

    Contact Now

  • Threaded DN150 RF casting flange F304/F304L

    Threaded DN150 RF casting flange F304/F304L

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Threaded DN150 RF casting flange F304 F304L Threaded flanges are attached to the pipe like any other screwed fittings and may be back welded to seal the joint between pipe and flange Although still available in most sizes and pressure ratings screwed fittings today are used almost exclusively in smaller pipe sizes and...

    Contact Now

  • Bliand(BL) alloy steel F182F22 forging FF flange

    Bliand(BL) alloy steel F182F22 forging FF flange

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000TON/YEAR

    • Certificate: ISO9001:2015

    Bliand BL alloy steel F182F22 forging FF flange A Blind Flange has no bore and is used to close ends of piping systems A blind flange also permits easy access to a line ones it has been sealed The blind flange is sometimes machined to accept a pipe of the nominal Size to which reduction is being made The reduction can...

    Contact Now

  • Long welding neck RF forging flange A105N

    Long welding neck RF forging flange A105N

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Long welding neck RF forging flange A105N Product description Carbon steel RF LWN flange ANSI B16 5 A105N LWN flange Class 900 Long Welding

    Contact Now

  • Socket Welding casting RF flange F304/F304L

    Socket Welding casting RF flange F304/F304L

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Socket Welding casting RF flange F304 F304L Socket Welding flanges have counter bore is slightly larger than the Outer Diameter of the matching pipe allowing the pipe to be inserted A restriction is built into the bottom of the bore which acts as a shoulder for the pipe to rest on and has the same ID of matching pipe...

    Contact Now

  • Forging machine slip-on RF A182 F11  flange

    Forging machine slip-on RF A182 F11 flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Forging machine slip on RF A182 F11 flange Slip on pipe flanges actually slip over the pipe These pipe flanges are typically machined with an inside diameter slightly larger than the outside diameter of the pipe Slip on pipe flanges are secured to the pipe with a fillet weld at the top and the bottom of the slip on...

    Contact Now

  • ANSI B16.5 Alloy steel  F9 blind flanges

    ANSI B16.5 Alloy steel F9 blind flanges

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 1 Ton

    Alloy Steel F9 Flanges have a higher degree of versatility it is thinner in size and fits well in compact work spaces and is much more economical compared to other flanges Also our Alloy Steel A182 Grade F9 Flanges are cost saving and are reusable and corrosion

    Contact Now

  • Yellow paint ASTM A182 F9 slip on flanges

    Yellow paint ASTM A182 F9 slip on flanges

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 1 Ton

    Alloy Steel F9 Flanges have a higher degree of versatility it is thinner in size and fits well in compact work spaces and is much more economical compared to other flanges Also our Alloy Steel A182 Grade F9 Flanges are cost saving and are reusable and corrosion

    Contact Now

  • Black paint A350LF2 forged flanges

    Black paint A350LF2 forged flanges

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 1 Ton

    The ASTM A350 lf2 forged flange types are stronger because they are forged from one piece of metal and could be used in applications where strength is required These flanges could also be welded with the piping system with

    Contact Now

  • A/SA350-LF2 CL1 / CL2 low-temperature flanges

    A/SA350-LF2 CL1 / CL2 low-temperature flanges

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 1 Ton

    ASTM A350 also known as ASME SA350 covers several grades of carbon and low alloy steel forged or ring rolled flanges forged fittings and valves intended primarily for low temperature service and requiring notch toughness

    Contact Now

  • Carbon steel A350 weld neck flanges

    Carbon steel A350 weld neck flanges

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 1 Ton

    ASTM A350 also known as ASME SA350 covers several grades of carbon and low alloy steel forged or ring rolled flanges forged fittings and valves intended primarily for low temperature service and requiring notch toughness

    Contact Now

  • Welding Neck Flange With Jack And Tap Holes

    Welding Neck Flange With Jack And Tap Holes

    • Brand: NC

    • Packaging: Sea-worthy plywood case/pallet

    • Supply Ability: 20,000Ton/Year

    • Min. Order: 10 Piece/Pieces

    The function of the orifice flange is to measure the rate of the flow of the commodity through the piping system Orifice flanges are easy to recognize because they have a hole drilled through the face of the flange perpendicular to the pipe They also have an additional set of bolts called jack screws These screws are...

    Contact Now

  • Class 600 socket welding RF forging flange

    Class 600 socket welding RF forging flange

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Class 600 socket welding RF forging flange Socket Welding flanges have counter bore is slightly larger than the Outer Diameter of the matching pipe allowing the pipe to be inserted A restriction is built into the bottom of the bore which acts as a shoulder for the pipe to rest on and has the same ID of matching pipe...

    Contact Now

  • Alloy steel lap joint casting flange RF

    Alloy steel lap joint casting flange RF

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Alloy steel lap joint casting flange RF A Lap Joint Flange is usually used in conjunction with Lap Joint Stubs Lap Joint Flanges in carbon or low alloy steel piping systems are best used when frequent dismantling for inspection and cleaning is required The use of Lap Joint Flanges at points where severe bending stress...

    Contact Now

  • Alloy steel WN (welding neck) RTJ flange

    Alloy steel WN (welding neck) RTJ flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Alloy steel WN welding neck RTJ flange Product description Hot forging advantages Alloy steel RTJ WN ANSI B16 47alloy steel flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself This...

    Contact Now

  • LONG WELDING NECK FLANGES

    LONG WELDING NECK FLANGES

    • Brand: NC

    • Packaging: plywood cases&pallets

    • Supply Ability: 10000Ton/Year

    • Min. Order: 1 Piece/Pieces

    Specifications 1500 3 4 long welding neck flange Class 1500 long welding neck L 200 long welding neck ANSI B16 5 LWN

    Contact Now

  • B16.5 Semi-finished Forging Flanges

    B16.5 Semi-finished Forging Flanges

    • Brand: NC

    • Packaging: Sea-worthy plywood case

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 1 Ton

    These flanges are semi machined without drilling and serration dimension are as per the standard with extra margin for further machining B16 5 Semi finished Forging Flanges enable clients do final machining at his own workshop accordingly also assures faster delivery and above all is priced lower than fully finished...

    Contact Now

  • Stainless steel SO (slip-on) RF flange

    Stainless steel SO (slip-on) RF flange

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Stainless steel SO slip on RF flange Slip on pipe flanges actually slip over the pipe These pipe flanges are typically machined with an inside diameter slightly larger than the outside diameter of the pipe Slip on pipe flanges are secured to the pipe with a fillet weld at the top and the bottom of the slip on pipe...

    Contact Now

  • Blind FF flange ASME 16.5 A105N

    Blind FF flange ASME 16.5 A105N

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Blind FF flange ASME 16 5 A105N Blind Flange has no bore and is used to close ends of piping systems A blind flange also permits easy access to a line ones it has been sealed The blind flange is sometimes machined to accept a pipe of the nominal Size to which reduction is being made The reduction can be either...

    Contact Now

  • Hot forging process of welding neck flange

    Hot forging process of welding neck flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Hot forging process of welding neck flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself This also reduces high stress concentration at the base of the hub of the weld neck pipe...

    Contact Now

  • B16.5 LF2 material weld neck flanges

    B16.5 LF2 material weld neck flanges

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 1 Ton

    The standard ASTM A350 specification covers both carbon and low alloy steel forged or ring rolled flanges forged fittings and valves These ltcs astm a350 gr lf2 cl1 components are intended primarily to be used in low temperature applications and require notch toughness testing The ltcs pipe flanges are manufactured to...

    Contact Now

Review

Lillian Li

Sep 27, 2020 5

Good deal, highly recommended!
Mrs.2 Cool Refrigeration Spares

Sep 05, 2020 5

Excellence! It’s a perfect purchase for me.
Ingemar Olausson

Sep 05, 2020 5

A very kind seller^ - ^
  • Related Information
It truly is our accountability to meet your needs and proficiently provide you. Your pleasure is our best reward. We are on the lookout ahead to the stop by for joint development for Asme B16 5 300lbs Flange , Asme B16.5 300Lbs Flange , ANSI B16.5 300LB Flange , We warmly welcome pals from all walks of lifetime to cooperate with us.
We'll make each hard work to become excellent and excellent, and speed up our measures for standing from the rank of intercontinental top-grade and high-tech enterprises for Asme B16 5 300lbs Flange , Asme B16.5 300Lbs Flange , ANSI B16.5 300LB Flange , Most problems between suppliers and clients are due to poor communication. Culturally suppliers can be reluctant to question factors they do not understand. We break down people barriers to ensure you get what you want to the level you expect when you want it. Faster delivery time and the product you want is our Criterion .

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List