New Century Forging Co., Ltd

New Century Forging Co., Ltd

86-351-5270488

New Century Forging Co., Ltd
Review
  • “Good Ball Valve Forging Process , though with some problems. However, the seller is active in solving problems for me.”
    Aditya Chaurasia
    sanitek products
  • “We have been looking for a professional and responsible supplier, and finally, I find an excellent Ball Valve Forging Process manufacturer like you guys.”
    Kishore Shah
    1A-KFZ-GEBRAUCHTTEILE E. MARZEN UG
  • “The Ball Valve Forging Process is at excellent packaging.”
    Ibrahim Hanoglu
    "РУССКО-БАЛТИЙСКИЙ ВАГОННЫЙ ЗАВОД" АКЦИОНЕРНОЕ ОБЩЕСТВО
  • “Came in fast. product is ok.Recommend NC company!”
    Nick Trani
    "ИНЖЕНЕРНО-ТЕХНИЧЕСКИЙ ЭЛЕКТРОКОМПЛЕКС" ОБЩЕСТВО С ОГРАНИЧЕННОЙ ОТВЕТСТВЕННОСТЬЮ
  • “High quality Ball Valve Forging Process but a little bit slow delivery as for me.”
    Aina Ogunsakin
    NTOTank

Ball Valve Forging Process

- manufacturer, factory, supplier from China

(Total 9 Products for Ball Valve Forging Process)

  • B16.5 orifice flange dimensions

    B16.5 orifice flange dimensions

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Orifice flanges are widely used in conjunction with orifice meters for measuring the rate of flow of liquids and gases. They are basically the same as standard welding neck and slip on flanges except the provision of radial, tapped holes in the flange ring for meter connections and additional bolts to act as jack...

    Contact Now

  • Engineering with Slip-On flange

    Engineering with Slip-On flange

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Engineering with Slip-On flange STEEL FLANGE ASME FLANGE B16.5 FLANGE Slip on pipe flanges actually slip over the pipe. These pipe flanges are typically machined with an inside diameter slightly larger than the outside diameter of the pipe. Slip on pipe flanges are secured to the pipe with a fillet weld at the top and...

    Contact Now

  • EN1092 welding neck flange

    EN1092 welding neck flange

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    EN1092 welding neck flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange. This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself. This also reduces high stress concentration at the base of the hub of the weld neck pipe flanges. Weld neck...

    Contact Now

  • 8``slip-op alloy steel flange

    8``slip-op alloy steel flange

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Alloy forged steel material Alloy flange forging process 8‘’slip-op alloy steel flange Slip on weld fange can be slid onto a pipe and then welded in place. It is made of carbon steel, alloy steel, and stainless steel. The industrial processes come into die forging,and machining, we can provide a wide range of slip on...

    Contact Now

  • Alloy steel blind flange

    Alloy steel blind flange

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Alloy steel flange blind flange A Blind Flange has no bore, and is used to close ends of piping systems. A blind flange also permits easy access to a line ones it has been sealed. The blind flange is sometimes machined to accept a pipe of the nominal Size to which reduction is being made. The reduction can be either...

    Contact Now

  • Hot forging process of welding neck flange

    Hot forging process of welding neck flange

    • Brand: NC
    • Packaging: PLYWOOD CASE
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Hot forging process of welding neck flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange. This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself. This also reduces high stress concentration at the base of the hub of the weld neck pipe...

    Contact Now

  • JIS carbon steel threaded RTJ 900# flange

    JIS carbon steel threaded RTJ 900# flange

    • Brand: NC
    • Packaging: PLYWOOD CASE
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    JIS carbon steel threaded RTJ 900# flange Threaded flanges are attached to the pipe like any other screwed fittings, and may be back-welded to seal the joint between pipe and flange. Although still available in most sizes and pressure ratings, screwed fittings today are used almost exclusively in smaller pipe sizes...

    Contact Now

  • Welding neck alloy steel (RF) A182F11 flange

    Welding neck alloy steel (RF) A182F11 flange

    • Brand: NC
    • Packaging: PLYWOOD CASE
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Welding neck alloy steel (RF) A182F11 flange High-neck flanges: Compared with butt-welded flanges, the welding workload is large, the welding rod consumption is high, and it cannot withstand high temperature and pressure, repeated bending and temperature fluctuations, but it is more convenient to install on site and...

    Contact Now

  • Welding neck A105N/A350LF2 carbon steel RF flange

    Welding neck A105N/A350LF2 carbon steel RF flange

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Welding neck A105N/A350LF2 carbon steel RF flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange. This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself. This also reduces high stress concentration at the base of the hub of the weld neck...

    Contact Now

  • Video
  • Hot forging process of welding neck flange
  • JIS carbon steel threaded RTJ 900# flange
  • Related Information

High Quality Products

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Home > Ball Valve Forging Process
Related Products List

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send