Communicate with Supplier? Supplier
Xing Ms. Xing
What can I do for you?
Contact Supplier
New Century Machinery Co., Ltd

New Century Machinery Co., Ltd

ncflange@163.com

86-351-5270488

New Century Machinery Co., Ltd

Blind Flange Dimensions - manufacturer, factory, supplier from China

(Total 24 Products for Blind Flange Dimensions)

  • B16.5 Blind Flange Dimensions

    B16.5 Blind Flange Dimensions

    • Brand: NC

    • Packaging: plywood cases&pallets

    • Supply Ability: 25000Ton/Year

    • Min. Order: 1 Kilogram

    Class 600 4in Blind Flanges A blind flange is a solid disk used to block off a pipeline or to create a stop The blind flange has no opening can be inserted between two open flanges and used to block off the flow of liquid through a pipeline We can produce blind flanges from 1 2 to 60 in class 150 to 2500 with material...

    Contact Now

  • ANSI B16.5 Class 150 Blind Flanges

    ANSI B16.5 Class 150 Blind Flanges

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    ANSI B16 5 Class 150 Blind Flanges A Blind Flange has no bore and is used to close ends of piping systems A blind flange also permits easy access to a line ones it has been sealed The blind flange is sometimes machined to accept a pipe of the nominal Size to which reduction is being made The reduction can be either...

    Contact Now

  • Spectacle Blind flange foreign

    Spectacle Blind flange foreign

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Spectacle Blind flange foreign A spectacle blind is a safety device used to isolate a section of line or piece of equipment when the line or equipment needs to be inspected or removed from service It is different than a valve in that the blind is a permanent or long term isolation

    Contact Now

  • Class 600  blind flange dimensions in mm

    Class 600 blind flange dimensions in mm

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Class 600 blind flange dimensions in mm Product description Stainless steel blind ANSI B16 47 blind Flange factory price

    Contact Now

  • Blind Flange Dimensions 600lb

    Blind Flange Dimensions 600lb

    • Brand: NC

    • Packaging: Sea-worthy plywood case

    • Supply Ability: 20,000Ton/Year

    • Min. Order: 1 Piece/Pieces

    The flange type is ASME B16 47 Ser A 600 Blind with material A105 Following pls check the blind flange dimensions

    Contact Now

  • EN 1092-1 type 10 dimensions of blind

    EN 1092-1 type 10 dimensions of blind

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    EN 1092 1 type 10 dimensions of blind EN 1092 1 flange EN 1092 1 A182 F22 Blind flange dimensions

    Contact Now

  • Galvanized pipe fittings catalog

    Galvanized pipe fittings catalog

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Galvanized pipe fittings catalog Blind flange dimensions 300 Weld neck flange dimensions Slip on flange

    Contact Now

  • Blind Flange With 1/2" NPT Centre Hole

    Blind Flange With 1/2" NPT Centre Hole

    • Brand: NC

    • Packaging: Sea-worthy plywood case/pallet

    • Supply Ability: 20,000Ton/Year

    • Min. Order: 1 Piece/Pieces

    Besides standard blind flanges we also can produce forged blind flanges as Slip on blind flange blind flange with centre holes in 1 2 3

    Contact Now

  • Class150 3" Blind Flange 3/4" NPT Hole

    Class150 3" Blind Flange 3/4" NPT Hole

    • Brand: NC

    • Packaging: Sea-worthy plywood case/pallet

    • Supply Ability: 20,000Ton/Year

    • Min. Order: 10 Piece/Pieces

    Blind flange with 1 2 NPT tapped thread these include NPT tapped holes and special threads to allow pressure test connections to be fitted Blind flanges are generally used to blank off the ends of pipe They are also used on similar valves and pressure vessel openings Because they are often located at the ends of...

    Contact Now

  • Class1500 Blind Flange 2" Tapped 1/2" NPT

    Class1500 Blind Flange 2" Tapped 1/2" NPT

    • Brand: NC

    • Packaging: Sea-worthy plywood case/pallet

    • Supply Ability: 20,000Ton/Year

    • Min. Order: 10 Piece/Pieces

    Blind flange with 1 2 NPT tapped thread these include NPT tapped holes and special threads to allow pressure test connections to be fitted Blind flanges are generally used to blank off the ends of pipe They are also used on similar valves and pressure vessel openings Because they are often located at the ends of...

    Contact Now

  • 4" Tapped 1-1/2" NPT Blind Flange Class600 A/SA105

    4" Tapped 1-1/2" NPT Blind Flange Class600 A/SA105

    • Brand: NC

    • Packaging: Sea-worthy plywood case/pallet

    • Supply Ability: 20,000Ton/Year

    • Min. Order: 10 Piece/Pieces

    Blind flange with 1 2 NPT tapped thread these include NPT tapped holes and special threads to allow pressure test connections to be fitted Blind flanges are generally used to blank off the ends of pipe They are also used on similar valves and pressure vessel openings Because they are often located at the ends of...

    Contact Now

  • 3/4" threaded flange casting foreign RF

    3/4" threaded flange casting foreign RF

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    3 4 threaded flange casting foreign RF Threaded flanges are attached to the pipe like any other screwed fittings and may be back welded to seal the joint between pipe and flange Although still available in most sizes and pressure ratings screwed fittings today are used almost exclusively in smaller pipe sizes and at...

    Contact Now

  • Welding neck stainless steel F304/F304L flange RF

    Welding neck stainless steel F304/F304L flange RF

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Welding neck stainless steel F304 F304L flange RF Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself This also reduces high stress concentration at the base of the hub of the weld neck...

    Contact Now

  • ORIFICE WELDING NECK flange A105N (RF)

    ORIFICE WELDING NECK flange A105N (RF)

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Certificate: ISO9001:2015

    ORIFICE WELDING NECK flange A105N RF Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself This also reduces high stress concentration at the base of the hub of the weld neck pipe flanges...

    Contact Now

  • Welding neck alloy steel (RF) A182F11 flange

    Welding neck alloy steel (RF) A182F11 flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Welding neck alloy steel RF A182F11 flange High neck flanges Compared with butt welded flanges the welding workload is large the welding rod consumption is high and it cannot withstand high temperature and pressure repeated bending and temperature fluctuations but it is more convenient to install on site and can omit...

    Contact Now

  • JIS carbon steel threaded RTJ 900# flange

    JIS carbon steel threaded RTJ 900# flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    JIS carbon steel threaded RTJ 900 flange Threaded flanges are attached to the pipe like any other screwed fittings and may be back welded to seal the joint between pipe and flange Although still available in most sizes and pressure ratings screwed fittings today are used almost exclusively in smaller pipe sizes and at...

    Contact Now

  • Blind Flange With 2in National Pipe Tappered NPT

    Blind Flange With 2in National Pipe Tappered NPT

    • Brand: NC

    • Packaging: Sea-worthy plywood case/pallet

    • Supply Ability: 20,000Ton/Year

    • Min. Order: 10 Piece/Pieces

    Blind flange with 1 2 NPT tapped thread these include NPT tapped holes and special threads to allow pressure test connections to be fitted Blind flanges are generally used to blank off the ends of pipe They are also used on similar valves and pressure vessel openings Because they are often located at the ends of...

    Contact Now

  • 2 inch threaded 16# carbon steel RF flange

    2 inch threaded 16# carbon steel RF flange

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    2 inch threaded 16 carbon steel RF flange Threaded flanges are attached to the pipe like any other screwed fittings and may be back welded to seal the joint between pipe and flange Although still available in most sizes and pressure ratings screwed fittings today are used almost exclusively in smaller pipe sizes and...

    Contact Now

  • Carbon welding neck flange

    Carbon welding neck flange

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Carbon welding neck Class 150 carbon steel welding Carbon steel welding flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself This also reduces high stress concentration at the base...

    Contact Now

  • Superior quality welding neck (WN) forging flange

    Superior quality welding neck (WN) forging flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Superior quality welding neck WN forging flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself This also reduces high stress concentration at the base of the hub of the weld neck pipe...

    Contact Now

  • Threaded DN150 RF casting flange F304/F304L

    Threaded DN150 RF casting flange F304/F304L

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Threaded DN150 RF casting flange F304 F304L Threaded flanges are attached to the pipe like any other screwed fittings and may be back welded to seal the joint between pipe and flange Although still available in most sizes and pressure ratings screwed fittings today are used almost exclusively in smaller pipe sizes and...

    Contact Now

  • Bliand(BL) alloy steel F182F22 forging FF flange

    Bliand(BL) alloy steel F182F22 forging FF flange

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000TON/YEAR

    • Certificate: ISO9001:2015

    Bliand BL alloy steel F182F22 forging FF flange A Blind Flange has no bore and is used to close ends of piping systems A blind flange also permits easy access to a line ones it has been sealed The blind flange is sometimes machined to accept a pipe of the nominal Size to which reduction is being made The reduction can...

    Contact Now

  • Long welding neck RF forging flange A105N

    Long welding neck RF forging flange A105N

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Long welding neck RF forging flange A105N Product description Carbon steel RF LWN flange ANSI B16 5 A105N LWN flange Class 900 Long Welding

    Contact Now

  • Socket Welding casting RF flange F304/F304L

    Socket Welding casting RF flange F304/F304L

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Socket Welding casting RF flange F304 F304L Socket Welding flanges have counter bore is slightly larger than the Outer Diameter of the matching pipe allowing the pipe to be inserted A restriction is built into the bottom of the bore which acts as a shoulder for the pipe to rest on and has the same ID of matching pipe...

    Contact Now

Review

Mohammed El Rass

Sep 28, 2020 4

Good deal, highly recommended!
Dana Mikéci

Sep 27, 2020 5

Excellence! It’s a perfect purchase for me.
Eno Peter

Sep 24, 2020 4

A very kind seller^ - ^
  • Related Information
We aim to find out quality disfigurement from the production and supply the best service to domestic and overseas customers wholeheartedly for Blind Flange Dimensions , Blind Flange Dimensions 300 , Blind Flange Dimensions 600lb , To make every client satisfied with us and achieve win-win success we'll continue to try our best to serve and satisfy you! Sincerely looking forward to cooperating with more overseas customers based on mutual benefits and great future business. Thank you.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List