New Century Forging Co., Ltd

New Century Forging Co., Ltd

86-351-5270488

New Century Forging Co., Ltd
Review
  • “Good Class 3000 Flange Dimensions , though with some problems. However, the seller is active in solving problems for me.”
    Aditya Chaurasia
    sanitek products
  • “We have been looking for a professional and responsible supplier, and finally, I find an excellent Class 3000 Flange Dimensions manufacturer like you guys.”
    Kishore Shah
    1A-KFZ-GEBRAUCHTTEILE E. MARZEN UG
  • “The Class 3000 Flange Dimensions is at excellent packaging.”
    Ibrahim Hanoglu
    "РУССКО-БАЛТИЙСКИЙ ВАГОННЫЙ ЗАВОД" АКЦИОНЕРНОЕ ОБЩЕСТВО
  • “Came in fast. product is ok.Recommend NC company!”
    Nick Trani
    "ИНЖЕНЕРНО-ТЕХНИЧЕСКИЙ ЭЛЕКТРОКОМПЛЕКС" ОБЩЕСТВО С ОГРАНИЧЕННОЙ ОТВЕТСТВЕННОСТЬЮ
  • “High quality Class 3000 Flange Dimensions but a little bit slow delivery as for me.”
    Aina Ogunsakin
    NTOTank

Class 3000 Flange Dimensions

- manufacturer, factory, supplier from China

(Total 12 Products for Class 3000 Flange Dimensions)

  • ANSI B16.5 Class 150 Blind Flanges

    ANSI B16.5 Class 150 Blind Flanges

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    ANSI B16.5 Class 150 Blind Flanges A Blind Flange has no bore, and is used to close ends of piping systems. A blind flange also permits easy access to a line ones it has been sealed. The blind flange is sometimes machined to accept a pipe of the nominal Size to which reduction is being made. The reduction can be...

    Contact Now

  • ANSI B16.5 Class 900 Orifice Flanges

    ANSI B16.5 Class 900 Orifice Flanges

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    AMSE Flange B16.5 Flange Class 600 B16.36 Orifice Flange B16.36 Orifice Flange is intended for use instead of standard pipe Flanges when an orifice plate or flow nozzle must be installed. Pairs of pressure tapings are machined into the Orifice Flange, making separate orifice carriers or tapings in the pipe wall...

    Contact Now

  • Types of flanges welding neck

    Types of flanges welding neck

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Types of flanges welding neck The welded neck pipe flange is connected to the pipe by welding the pipe to the neck of the pipe flange. This allows stress to be transferred from the welded neck tube flange to the tube itself. This also reduces the high stress concentration at the bottom of the hub where the neck flange...

    Contact Now

  • Class 600 long weld neck flange dimensions

    Class 600 long weld neck flange dimensions

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    ASME flange B16.47-A Flange Class 600 long weld neck flange dimensions Long weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange. This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself. This also reduces high stress concentration at the base of...

    Contact Now

  • Class 600 raised face flange dimensions

    Class 600 raised face flange dimensions

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    DIN FLANGE DIN2573 SLIP ON FLANGE ASME B16.5 FLANGE Class 600 raised face flange dimensions Product description: Raised face flange foreign ANSI B16.5 raised face flange DIN raised face flange A Lap Joint Flange is usually used in conjunction with Lap Joint Stubs. Lap Joint Flanges in carbon or low alloy steel piping...

    Contact Now

  • Class 600  blind flange dimensions in mm

    Class 600 blind flange dimensions in mm

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    ASME flange (American National Standards Institute) include ASME B16.5 flange, ASME B16.47-A flange, ASME B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange), socket welded flange, Orifice Flanges, long weld neck flange...

    Contact Now

  • EN 1092-1 type 10 dimensions of blind

    EN 1092-1 type 10 dimensions of blind

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    EN 1092-1 type 10 dimensions of blind ASME flange include B16.5 flange, B16.47-A flange, B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange), socket welded flange, B16.36 Orifice Flange, long weld neck flange and special...

    Contact Now

  • Lap jiont flange dimensions class 900

    Lap jiont flange dimensions class 900

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Lap Joint Flange is usually used in conjunction with Lap Joint Stubs. Lap Joint Flanges in carbon or low alloy steel piping systems are best used when frequent dismantling for inspection and cleaning is required. The use of Lap Joint Flanges at points where severe bending stress occurs should be avoided. The...

    Contact Now

  • Flange ANSI B16 5 Class 300

    Flange ANSI B16 5 Class 300

    • Brand: NC
    • Packaging: Sea-worthy plywood case/pallet
    • Supply Ability: 20,000Ton/Year
    • Min. Order: 1 Ton

    Flange ANSI B16 5 class 300 are most popular flanges during our daily production line. We can produce 300# flanges in WN, BL, SO, SW, TH... with face RF, FF, RTJ, LT, LG.... The industrial processes come into die forging,and machining,we can provide a wide range of slip on weld flanges,following on standards like ASME...

    Contact Now

  • AWWA C207 Class D Flange Dimensions

    AWWA C207 Class D Flange Dimensions

    • Brand: NC
    • Packaging: Sea-worthy plywood case/pallet
    • Supply Ability: 20,000Ton/Year
    • Min. Order: 1 Ton

    ASME FLANGE AWWA C207 CLASS E RING AWWA standard includes Class B, Class D, Class E with flange types of steel ring and hub Flanges. The industrial processes come into die forging,and machining,we can provide a wide range of AWWA flanges,following on standards like ASME B16.5 Flange, ASME B16.47 Flange, DIN 2573 Slip...

    Contact Now

  • Stainless steel slip-on flange

    Stainless steel slip-on flange

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Stainless steel slip-on ANSI B16.5 stainless flange Class 300 raised face flange dimensions The industrial processes come into die forging,and machining,we can provide a wide range of flanges,following on standards like ASME B16.5 Flange, ASME B16.47 Flange, DIN 2573 Slip On Flange, DIN 2631 Welding Neck Flange, JIS...

    Contact Now

  • Class 900 flange dimensions of alloy welding neck

    Class 900 flange dimensions of alloy welding neck

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Class 900 flange dimensions of alloy welding neck ASME flange include B16.5 flange, B16.47-A flange, B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange), socket welded flange, B16.36 Orifice Flange, long weld neck flange...

    Contact Now

  • Video
  • Class 600 raised face flange dimensions
  • EN 1092-1 type 10 dimensions of blind
  • Flange ANSI B16 5 Class 300
  • Related Information

High Quality Products

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Home > Class 3000 Flange Dimensions
Related Products List

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send