New Century Forging Co., Ltd
86-351-5270488
Product Categories
(Total 12 Products for Galvanized Flange Ansi B16 5)
Custom ANSI B16.5 galvanized blind pipe flanges
Custom ANSI B16.5 galvanized blind pipe flanges STEEL FLANGE ASME B16.5 FLANGE HOT GORGING Blind plate flange is also called blind plate, and the correct name is called flange cover. It is a flange without a hole in the middle, which is used to seal the pipe plug. There are many types of sealing surfaces, including...
2 inch galvanized flange Screwed or Threaded flanges are attached to the pipe like any other screwed fittings, and may be back-welded to seal the joint between pipe and flange. Although still available in most sizes and pressure ratings, screwed fittings today are used almost exclusively in smaller pipe sizes and at...
6 inch Galvanized flange welding neck
ASME flange include B16.5 flange, B16.47-A flange, B16.47-B flange , this standard system include slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange), socket welded flange, B16.36 Orifice Flange, long weld neck flange and special flange, sizes from 1/2 inch to 60 inch,...
Hot Forging Galvanized pipe forged flange product description: 1. Manufacturing standards: ASME B16.5; B16.47A, B 2. Pressure rating: 150LB~2500LB; 3. Product material: F304, F316, A105, A182F11 , A350LF2, A182F9 , A182F22,A182F51,ETC. 4. Production process: blanking-forging-heat treatment-machining-surface...
Flat face galvanized carbon steel flange
Hot dip galvanizing (HDG) is a process in which steel flanges are submerged in molten zinc at a temperature of 850F. During this process, the molten zinc reacts with the steel to form thin layers of zinc alloys. These layers form a barrier that can provide exceptional corrosion protection compared to more traditional...
ASTM A694 F52 12" WNRF 900# B16.5 flange
ASTM A694 F52 12" WNRF 900# B16.5 flange Slip on pipe flanges actually slip over the pipe. These pipe flanges are typically machined with an inside diameter slightly larger than the outside diameter of the pipe. Slip on pipe flanges are secured to the pipe with a fillet weld at the top and the bottom of the slip on...
ASTM A105N BLIND 300# B16.5 A Blind Flange has no bore, and is used to close ends of piping systems. A blind flange also permits easy access to a line ones it has been sealed. The blind flange is sometimes machined to accept a pipe of the nominal Size to which reduction is being made. The reduction can be either...
Welding neck alloy steel standard flange
Welding neck alloy steel standard flange welding flange with neck is a kind of flange with conical neck and butt welding with cylinder or pipe. It belongs to integral flange. Due to the transition structure of conical neck and butt welding connection, the strength and stiffness of flange are strengthened, and the...
B16.5 Hot Galvanized Threaded Flange
Threaded flanges are confined to special applications. Their chief merit lies in the fact that they can be assembled without welding this explains their use in extremely high pressure services, particularly at or near atmospheric temperature, where alloy steel is essential for strength and where the necessary post...
Painting for flanges In order to protect flanges from rusting, after machining, all surface of flanges will be dealed with anti-rust treatment. The treatment includes anti-rust oil, yellow painting, blue painting, black painting... The industrial processes come into die forging,and machining,we can provide a wide...
Welding neck flanges are most widely used flanges by welding pipe to its neck part, the welding neck flanges' inside diameter is designed to match with pipe's inside diameter as marked SCH STD/80/160...or special wall thickness. Our screw press machines can produce welding neck from 2" to 6" from 150lb to 2500lb, make...
Black Painting Welding Neck Flanges
Welding neck flanges are most widely used flanges by welding pipe to its neck part, the welding neck flanges' inside diameter is designed to match with pipe's inside diameter as marked SCH STD/80/160...or special wall thickness. Our screw press machines can produce welding neck from 2" to 6" from 150lb to 2500lb, make...
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.