New Century Forging Co., Ltd

New Century Forging Co., Ltd

86-351-5270488

New Century Forging Co., Ltd
Review
  • “Good Lap Joint Type , though with some problems. However, the seller is active in solving problems for me.”
    Aditya Chaurasia
    sanitek products
  • “We have been looking for a professional and responsible supplier, and finally, I find an excellent Lap Joint Type manufacturer like you guys.”
    Kishore Shah
    1A-KFZ-GEBRAUCHTTEILE E. MARZEN UG
  • “The Lap Joint Type is at excellent packaging.”
    Ibrahim Hanoglu
    "РУССКО-БАЛТИЙСКИЙ ВАГОННЫЙ ЗАВОД" АКЦИОНЕРНОЕ ОБЩЕСТВО
  • “Came in fast. product is ok.Recommend NC company!”
    Nick Trani
    "ИНЖЕНЕРНО-ТЕХНИЧЕСКИЙ ЭЛЕКТРОКОМПЛЕКС" ОБЩЕСТВО С ОГРАНИЧЕННОЙ ОТВЕТСТВЕННОСТЬЮ
  • “High quality Lap Joint Type but a little bit slow delivery as for me.”
    Aina Ogunsakin
    NTOTank

Lap Joint Type

- manufacturer, factory, supplier from China

(Total 9 Products for Lap Joint Type)

  • ANSI B16.5 Lap Joint Flanges

    ANSI B16.5 Lap Joint Flanges

    • Brand: NC
    • Packaging: PLYWOOD
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Lap joint flanges are primarily employed with lap joint stubs, the combined initial cost of the two items being approximately one third higher than that of comparable welding neck flanges. Their pressure holding ability is little, if any, better than that of slip on flanges and the fatigue life of the assembly is only...

    Contact Now

  • Lap jiont flange dimensions class 900

    Lap jiont flange dimensions class 900

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Lap Joint Flange is usually used in conjunction with Lap Joint Stubs. Lap Joint Flanges in carbon or low alloy steel piping systems are best used when frequent dismantling for inspection and cleaning is required. The use of Lap Joint Flanges at points where severe bending stress occurs should be avoided. The...

    Contact Now

  • Zinc Plated Ring Type Joint Flanges

    Zinc Plated Ring Type Joint Flanges

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    A Ring type joint flange (RTJ) is a machined metallic ring with a deep groove cut into its face. This groove rests a metal ring which gets compressed when the connec

    Contact Now

  • Carbon steel raised face ring type joint flanges

    Carbon steel raised face ring type joint flanges

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Ring type joint flange, abbreviated as RTJF, is a type of flange that uses a metal ring that sits in a hexagonal groove as a gasket to seal the flange pair. The flanges seal when the bolts are tightened and the gasket is compressed into the groove making a metal to metal seal. An RTJ flange usually has a raised face...

    Contact Now

  • ANSI B16.9 Carbon Steel Ring Type Joint Flange

    ANSI B16.9 Carbon Steel Ring Type Joint Flange

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    A Ring type joint flange (RTJ) is a machined metallic ring with a deep groove cut into its face. This groove rests a metal ring which gets compressed when the connecting bolts of the flange are tightened. This compression results in a leak-proof, close-fitting seal on the pipe or connection. The industrial processes...

    Contact Now

  • 900LB Welding Neck RTJ FLANGE

    900LB Welding Neck RTJ FLANGE

    • Brand: NC
    • Packaging: Plywood cases
    • Supply Ability: 20,000Ton/Year
    • Min. Order: 1 Ton

    B16.5 WN RF Flange ASTM A105 Carbon Steel Flange A105 steel flanges have a better mechenical properties It commonly used in pipe and vessels. Ring Type joint flange has a better sealing always used on high pressure flanges. The industrial processes come into die forging,and machining,we can provide a wide range of WN...

    Contact Now

  • Ring Type Joint gaskets

    Ring Type Joint gaskets

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Ring Type Joint gaskets are metallic sealing rings, suitable for high-pressure and high-temperature applications. They are always applied to special, accompanying flanges which ensure good, reliable sealing with the correct choice of profiles and material. The industrial processes come into die forging,and...

    Contact Now

  • B16.5 1500LB Ring Type Joint Flanges

    B16.5 1500LB Ring Type Joint Flanges

    • Brand: NC
    • Packaging: Sea-worthy plywood case/pallet
    • Supply Ability: 20,000Ton/Year
    • Min. Order: 1 Ton

    We can produce ASTM A182 F304 stainless steel flanges in different types like welding neck, blind, slip on... Besides ASTM A182 304/F304L, also can produce A182 F316/316L. A182 F321... The industrial processes come into die forging,and machining,we can provide a wide range of slip on weld flanges,following on...

    Contact Now

  • Ring type joint welding neck flange

    Ring type joint welding neck flange

    • Brand: NC
    • Packaging: PLYWOOD CASE
    • Supply Ability: 12,000TON/YEAR
    • Min. Order: 1 Ton

    Welding neck flange are distinguished from other types by their long tapered hub and gentle transition of thickness in the region of the butt weld joining them to the pipe. The long tapered hub provides an important reinforcement of the flange proper from the standpoint of strength and resistance to dishing. The...

    Contact Now

  • Video
  • ANSI B16.5 Lap Joint Flanges
  • Related Information

High Quality Products

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Home > Lap Joint Type
Related Products List

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send