Communicate with Supplier? Supplier
Xing Ms. Xing
What can I do for you?
Contact Supplier
New Century Machinery Co., Ltd

New Century Machinery Co., Ltd

ncflange@163.com

86-351-5270488

New Century Machinery Co., Ltd

Reducing Carbon Steel Pipe Flanges - manufacturer, factory, supplier from China

(Total 24 Products for Reducing Carbon Steel Pipe Flanges)

  • 900# RTJ welding neck B16.47 alloy steel flange

    900# RTJ welding neck B16.47 alloy steel flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Certificate: ISO9001:2015

    900 RTJ welding neck B16 47 alloy steel flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself This also reduces high stress concentration at the base of the hub of the weld neck pipe...

    Contact Now

  • Welding neck stainless steel F304/F304L flange RF

    Welding neck stainless steel F304/F304L flange RF

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Welding neck stainless steel F304 F304L flange RF Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself This also reduces high stress concentration at the base of the hub of the weld neck...

    Contact Now

  • Welding neck alloy steel (RF) A182F11 flange

    Welding neck alloy steel (RF) A182F11 flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Welding neck alloy steel RF A182F11 flange High neck flanges Compared with butt welded flanges the welding workload is large the welding rod consumption is high and it cannot withstand high temperature and pressure repeated bending and temperature fluctuations but it is more convenient to install on site and can omit...

    Contact Now

  • JIS carbon steel threaded RTJ 900# flange

    JIS carbon steel threaded RTJ 900# flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    JIS carbon steel threaded RTJ 900 flange Threaded flanges are attached to the pipe like any other screwed fittings and may be back welded to seal the joint between pipe and flange Although still available in most sizes and pressure ratings screwed fittings today are used almost exclusively in smaller pipe sizes and at...

    Contact Now

  • Blind Flange With 2in National Pipe Tappered NPT

    Blind Flange With 2in National Pipe Tappered NPT

    • Brand: NC

    • Packaging: Sea-worthy plywood case/pallet

    • Supply Ability: 20,000Ton/Year

    • Min. Order: 10 Piece/Pieces

    Blind flange with 1 2 NPT tapped thread these include NPT tapped holes and special threads to allow pressure test connections to be fitted Blind flanges are generally used to blank off the ends of pipe They are also used on similar valves and pressure vessel openings Because they are often located at the ends of...

    Contact Now

  • 2 inch threaded 16# carbon steel RF flange

    2 inch threaded 16# carbon steel RF flange

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    2 inch threaded 16 carbon steel RF flange Threaded flanges are attached to the pipe like any other screwed fittings and may be back welded to seal the joint between pipe and flange Although still available in most sizes and pressure ratings screwed fittings today are used almost exclusively in smaller pipe sizes and...

    Contact Now

  • Carbon welding neck flange

    Carbon welding neck flange

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Carbon welding neck Class 150 carbon steel welding Carbon steel welding flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself This also reduces high stress concentration at the base...

    Contact Now

  • Steel pipe fitting

    Steel pipe fitting

    • Brand: NC

    • Packaging: plywood cases&pallets

    • Supply Ability: 10000Ton/Year

    • Min. Order: 1 Piece/Pieces

    We started doing flange business since 1997 with new factory established in 2002 in Dingxiang town of flange With 280 professional workers 40 000 square meters the annual production capacity is 12 000 000 ton Our products have been exported to South Korea Japan Italy Turkey Germany America Denmark and got good...

    Contact Now

  • Bliand(BL) alloy steel F182F22 forging FF flange

    Bliand(BL) alloy steel F182F22 forging FF flange

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000TON/YEAR

    • Certificate: ISO9001:2015

    Bliand BL alloy steel F182F22 forging FF flange A Blind Flange has no bore and is used to close ends of piping systems A blind flange also permits easy access to a line ones it has been sealed The blind flange is sometimes machined to accept a pipe of the nominal Size to which reduction is being made The reduction can...

    Contact Now

  • ANSI B16.5 Alloy steel  F9 blind flanges

    ANSI B16.5 Alloy steel F9 blind flanges

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 1 Ton

    Alloy Steel F9 Flanges have a higher degree of versatility it is thinner in size and fits well in compact work spaces and is much more economical compared to other flanges Also our Alloy Steel A182 Grade F9 Flanges are cost saving and are reusable and corrosion

    Contact Now

  • Yellow paint ASTM A182 F9 slip on flanges

    Yellow paint ASTM A182 F9 slip on flanges

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 1 Ton

    Alloy Steel F9 Flanges have a higher degree of versatility it is thinner in size and fits well in compact work spaces and is much more economical compared to other flanges Also our Alloy Steel A182 Grade F9 Flanges are cost saving and are reusable and corrosion

    Contact Now

  • Black paint A350LF2 forged flanges

    Black paint A350LF2 forged flanges

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 1 Ton

    The ASTM A350 lf2 forged flange types are stronger because they are forged from one piece of metal and could be used in applications where strength is required These flanges could also be welded with the piping system with

    Contact Now

  • A/SA350-LF2 CL1 / CL2 low-temperature flanges

    A/SA350-LF2 CL1 / CL2 low-temperature flanges

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 1 Ton

    ASTM A350 also known as ASME SA350 covers several grades of carbon and low alloy steel forged or ring rolled flanges forged fittings and valves intended primarily for low temperature service and requiring notch toughness

    Contact Now

  • Carbon steel A350 weld neck flanges

    Carbon steel A350 weld neck flanges

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 1 Ton

    ASTM A350 also known as ASME SA350 covers several grades of carbon and low alloy steel forged or ring rolled flanges forged fittings and valves intended primarily for low temperature service and requiring notch toughness

    Contact Now

  • Alloy steel lap joint casting flange RF

    Alloy steel lap joint casting flange RF

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Alloy steel lap joint casting flange RF A Lap Joint Flange is usually used in conjunction with Lap Joint Stubs Lap Joint Flanges in carbon or low alloy steel piping systems are best used when frequent dismantling for inspection and cleaning is required The use of Lap Joint Flanges at points where severe bending stress...

    Contact Now

  • Alloy steel WN (welding neck) RTJ flange

    Alloy steel WN (welding neck) RTJ flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Alloy steel WN welding neck RTJ flange Product description Hot forging advantages Alloy steel RTJ WN ANSI B16 47alloy steel flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself This...

    Contact Now

  • LONG WELDING NECK FLANGES

    LONG WELDING NECK FLANGES

    • Brand: NC

    • Packaging: plywood cases&pallets

    • Supply Ability: 10000Ton/Year

    • Min. Order: 1 Piece/Pieces

    Specifications 1500 3 4 long welding neck flange Class 1500 long welding neck L 200 long welding neck ANSI B16 5 LWN

    Contact Now

  • B16.5 Semi-finished Forging Flanges

    B16.5 Semi-finished Forging Flanges

    • Brand: NC

    • Packaging: Sea-worthy plywood case

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 1 Ton

    These flanges are semi machined without drilling and serration dimension are as per the standard with extra margin for further machining B16 5 Semi finished Forging Flanges enable clients do final machining at his own workshop accordingly also assures faster delivery and above all is priced lower than fully finished...

    Contact Now

  • Stainless steel SO (slip-on) RF flange

    Stainless steel SO (slip-on) RF flange

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Stainless steel SO slip on RF flange Slip on pipe flanges actually slip over the pipe These pipe flanges are typically machined with an inside diameter slightly larger than the outside diameter of the pipe Slip on pipe flanges are secured to the pipe with a fillet weld at the top and the bottom of the slip on pipe...

    Contact Now

  • B16.5 LF2 material weld neck flanges

    B16.5 LF2 material weld neck flanges

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 1 Ton

    The standard ASTM A350 specification covers both carbon and low alloy steel forged or ring rolled flanges forged fittings and valves These ltcs astm a350 gr lf2 cl1 components are intended primarily to be used in low temperature applications and require notch toughness testing The ltcs pipe flanges are manufactured to...

    Contact Now

  • A350 LF2 LF3 forged carbon steel flanges

    A350 LF2 LF3 forged carbon steel flanges

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 1 Ton

    This specification covers several grades of carbon and low alloy steel forged or ring rolled flanges forged fittings and Valves for low temperature

    Contact Now

  • Non-standard Flanges And Forgings

    Non-standard Flanges And Forgings

    • Brand: NC

    • Packaging: Sea-worthy plywood case/pallet

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 10 Piece/Pieces

    Besides all the standard flanges we also can produce non standard flanges and forgings with clients special request or drawing in different

    Contact Now

  • ASTM A350 LF2 LF3 LF6 Low Tem. Flanges

    ASTM A350 LF2 LF3 LF6 Low Tem. Flanges

    • Brand: NC

    • Packaging: Sea-worthy plywood case/pallet

    • Supply Ability: 20,000Ton/Year

    • Min. Order: 10 Piece/Pieces

    Besides A105 pipe flanges ASTM A350 forged flanges are another popular material in our daily production ASTM A350 includes LF2 LF3 LF6 we can produce them all for different types of flanges Surface treatment for this material can be black painting yellow painting and anti rust oil or according to client s

    Contact Now

  • A694 F42 F52 F60 F65 Forged Pipe Flanges

    A694 F42 F52 F60 F65 Forged Pipe Flanges

    • Brand: NC

    • Packaging: Sea-worthy plywood case/pallet

    • Supply Ability: 25,000Ton/Year

    • Min. Order: 10 Piece/Pieces

    ASTM A694 refers to the material of carbon and alloy steel pipe flanges fittings valves and parts for high pressure transmissions It covers material grades of F42 F46 F50 F52 F56 F60 F65 and F70 This material is usually used for high pressure flanges like 600 900 1500 and 2500 for B16 5 even API 5000psi 10000psi Grade...

    Contact Now

Review

Ihor Shevtsov

Sep 28, 2020 5

The Reducing Carbon Steel Pipe Flanges price is reasonable and help us a lot.Recommend !
Marc Torrades

Sep 14, 2020 4

thank you very much for fast and efficient delivery. A lot of sellers could learn from you. Highly recommend NC company!
Ahmad Obaid

Sep 11, 2020 5

It’s worthy.
  • Related Information
high-quality and successful company to satisfy your requirements. for Reducing Carbon Steel Pipe Flanges , Carbon Steel Pipe Flange , Gost Carbon Steel Pipe Flange , We welcome new and outdated buyers from all walks of lifestyle to make contact with us for long term enterprise interactions and mutual good results!
Our well-equipped facilities and great excellent command throughout all stages of generation enables us to guarantee total customer fulfillment for Reducing Carbon Steel Pipe Flanges , Carbon Steel Pipe Flange , Gost Carbon Steel Pipe Flange , We maintain long-term efforts and self-criticism which helps us and improvement constantly. We strive to improve customer efficiency to save costs for customers. We do our best to improve the quality of product. We'll not live up to the historic opportunity of the times.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List