New Century Forging Co., Ltd

New Century Forging Co., Ltd

86-351-5270488

New Century Forging Co., Ltd
Review
  • “Good Use Of Orifice Flange , though with some problems. However, the seller is active in solving problems for me.”
    Aditya Chaurasia
    sanitek products
  • “We have been looking for a professional and responsible supplier, and finally, I find an excellent Use Of Orifice Flange manufacturer like you guys.”
    Kishore Shah
    1A-KFZ-GEBRAUCHTTEILE E. MARZEN UG
  • “The Use Of Orifice Flange is at excellent packaging.”
    Ibrahim Hanoglu
    "РУССКО-БАЛТИЙСКИЙ ВАГОННЫЙ ЗАВОД" АКЦИОНЕРНОЕ ОБЩЕСТВО
  • “Came in fast. product is ok.Recommend NC company!”
    Nick Trani
    "ИНЖЕНЕРНО-ТЕХНИЧЕСКИЙ ЭЛЕКТРОКОМПЛЕКС" ОБЩЕСТВО С ОГРАНИЧЕННОЙ ОТВЕТСТВЕННОСТЬЮ
  • “High quality Use Of Orifice Flange but a little bit slow delivery as for me.”
    Aina Ogunsakin
    NTOTank

Use Of Orifice Flange

- manufacturer, factory, supplier from China

(Total 12 Products for Use Of Orifice Flange)

  • Forged flange orifice flange

    Forged flange orifice flange

    • Brand: NC
    • Packaging: PLYWOOD CASE
    • Supply Ability: 12,000TON/YEAR
    • Min. Order: 1 Ton

    Orifice flanges are widely used in conjunction with orifice meters for measuring the rate of flow of liquids and gases. They are basically the same as standard welding neck and slip on flanges except the provision of radial, tapped holes in the flange ring for meter connections and additional bolts to act as jack...

    Contact Now

  • Lap joint Flange Forged Flange

    Lap joint Flange Forged Flange

    • Brand: NC
    • Packaging: PLYWOOD CASE
    • Supply Ability: 12,000TON/YEAR
    • Min. Order: 1 Ton

    Lap joint flanges are primarily employed with lap joint stubs, the combined initial cost of the two items being approximately one third higher than that of comparable welding neck flanges. Their pressure holding ability is little, if any, better than that of slip on flanges and the fatigue life of the assembly is only...

    Contact Now

  • Non-Standard Class 2500# Orifice Flanges

    Non-Standard Class 2500# Orifice Flanges

    • Brand: NC
    • Packaging: PLIWOOD CASES
    • Supply Ability: 12,000TON/YEAR
    • Min. Order: 1 Ton

    ANSI B16.36 Orifice Flanges Orifice flanges are intended for use instead of standard pipe flanges when an orifice plate or flow nozzle must be installed. Pairs of pressure tappings are machined into the orifice flanges, making separate orifice carriers or tappings in the pipe wall unnecessary. Orifice flanges are...

    Contact Now

  • Carbon B16.5 orifice flange

    Carbon B16.5 orifice flange

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Carbgon B16.5 orifice flange Orifice flanges are widely used in conjunction with orifice meters for measuring the rate of flow of liquids and gases. They are basically the same as standard welding neck and slip on flanges except the provision of radial, tapped holes in the flange ring for meter connections and...

    Contact Now

  • ASME B16.36 Orifice Flange A182 F11

    ASME B16.36 Orifice Flange A182 F11

    • Brand: NC
    • Packaging: plywood cases&pallets
    • Supply Ability: 12000Ton/Year
    • Min. Order: 1 Ton

    Orifice flanges are widely used in conjunction with orifice meters for measuring the rate of flow of liquids and gases. They are basically the same as standard welding neck and slip on flanges except the provision of radial, tapped holes in the flange ring for meter connections and additional bolts to act as jack...

    Contact Now

  • ANSI B16.5 Class 900 Orifice Flanges

    ANSI B16.5 Class 900 Orifice Flanges

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    AMSE Flange B16.5 Flange Class 600 B16.36 Orifice Flange B16.36 Orifice Flange is intended for use instead of standard pipe Flanges when an orifice plate or flow nozzle must be installed. Pairs of pressure tapings are machined into the Orifice Flange, making separate orifice carriers or tapings in the pipe wall...

    Contact Now

  • Flange ANSI B16 5 Class 300

    Flange ANSI B16 5 Class 300

    • Brand: NC
    • Packaging: Sea-worthy plywood case/pallet
    • Supply Ability: 20,000Ton/Year
    • Min. Order: 1 Ton

    Flange ANSI B16 5 class 300 are most popular flanges during our daily production line. We can produce 300# flanges in WN, BL, SO, SW, TH... with face RF, FF, RTJ, LT, LG.... The industrial processes come into die forging,and machining,we can provide a wide range of slip on weld flanges,following on standards like ASME...

    Contact Now

  • Orifice Flange Tap Orientation

    Orifice Flange Tap Orientation

    • Brand: NC
    • Packaging: Sea-worthy plywood case/pallet
    • Supply Ability: 20,000Ton/Year
    • Min. Order: 1 Ton

    B16.36 Orifice Flanges are similar to B16.5 standard flanges, but with big thickness for small sizes. The industrial processes come into die forging,and machining,we can provide a wide range of slip on weld flanges,following on standards like ASME B16.5 Flange, ASME B16.47 Flange, DIN 2573 Slip On Flange, DIN 2631...

    Contact Now

  • Forged carbon steel A105 Orifice Flange

    Forged carbon steel A105 Orifice Flange

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Orifice flange is a special flange and is always used in pairs. It is used in conjunction with orifice plate for measure flow of liquids and gases in a piping system. Orifice flanges are pre-drilled with tapped holes made in the flange rims to accommodate metering pipe. The flange that makes up the orifice flange is...

    Contact Now

  • B16.5 orifice flange dimensions

    B16.5 orifice flange dimensions

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Orifice flanges are widely used in conjunction with orifice meters for measuring the rate of flow of liquids and gases. They are basically the same as standard welding neck and slip on flanges except the provision of radial, tapped holes in the flange ring for meter connections and additional bolts to act as jack...

    Contact Now

  • API 6A Stainless Steel Orifice Flange

    API 6A Stainless Steel Orifice Flange

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Duplex stainless steel Orifice flange also referred to as ORFF in its abbreviated form, are components used for metering the volumetric flow rate of liquids and gasses that are being transported through a pipe. When two Orifice Flange Jis 16k are used together, they are known an orifice flange union. The range of...

    Contact Now

  • ASME B16.36 Orifice Flanges

    ASME B16.36 Orifice Flanges

    • Brand: NC
    • Packaging: PLYWOOD CASES
    • Supply Ability: 12,000Ton/Year
    • Min. Order: 1 Ton

    Orifice Flanges generally come with either Raised Faces or RTJ (Ring Type Joint) facings. They are, for all intensive purposes, the same as weld neck and slip on flanges with extra machining. The industrial processes come into die forging,and machining,we can provide a wide range of slip on weld flanges,following on...

    Contact Now

  • Video
  • Flange ANSI B16 5 Class 300
  • Related Information

High Quality Products

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Home > Use Of Orifice Flange
Related Products List

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send