Communicate with Supplier? Supplier
Xing Ms. Xing
What can I do for you?
Contact Supplier
New Century Machinery Co., Ltd

New Century Machinery Co., Ltd

ncflange@163.com

86-351-5270488

New Century Machinery Co., Ltd

Alloy Steel Forging - manufacturer, factory, supplier from China

(Total 24 Products for Alloy Steel Forging)

  • ASTM A694 Carbon And Alloy Steel Forging Flanges

    ASTM A694 Carbon And Alloy Steel Forging Flanges

    • Brand: NC

    • Packaging: Sea-worthy plywood case/pallet

    • Supply Ability: 20,000Ton/Year

    • Min. Order: 10 Piece/Pieces

    We have produced 900LB ASTM A694 F65 Flanges for tons with good price and delivery ASTM A694 material have better properties than carbon steel

    Contact Now

  • ASTM A350 Low-alloy Steel Forgings And Flanges

    ASTM A350 Low-alloy Steel Forgings And Flanges

    • Brand: NC

    • Packaging: Sea-worthy plywood case/pallet

    • Supply Ability: 20,000Ton/Year

    • Min. Order: 10 Piece/Pieces

    ASTM A350 LF2 is the most common and popular material in our daily flange production besides this one A350 LF3 and A350 LF6 is also used for forged flanges we can produce them all any need pls contact The below photo is A350 LF6 API 6B 10000psi WNRTJ flanges in plywood packing for

    Contact Now

  • Welding neck stainless steel F304/F304L flange RF

    Welding neck stainless steel F304/F304L flange RF

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Welding neck stainless steel F304 F304L flange RF Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself This also reduces high stress concentration at the base of the hub of the weld neck...

    Contact Now

  • Welding neck alloy steel (RF) A182F11 flange

    Welding neck alloy steel (RF) A182F11 flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Welding neck alloy steel RF A182F11 flange High neck flanges Compared with butt welded flanges the welding workload is large the welding rod consumption is high and it cannot withstand high temperature and pressure repeated bending and temperature fluctuations but it is more convenient to install on site and can omit...

    Contact Now

  • JIS carbon steel threaded RTJ 900# flange

    JIS carbon steel threaded RTJ 900# flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    JIS carbon steel threaded RTJ 900 flange Threaded flanges are attached to the pipe like any other screwed fittings and may be back welded to seal the joint between pipe and flange Although still available in most sizes and pressure ratings screwed fittings today are used almost exclusively in smaller pipe sizes and at...

    Contact Now

  • 2 inch threaded 16# carbon steel RF flange

    2 inch threaded 16# carbon steel RF flange

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    2 inch threaded 16 carbon steel RF flange Threaded flanges are attached to the pipe like any other screwed fittings and may be back welded to seal the joint between pipe and flange Although still available in most sizes and pressure ratings screwed fittings today are used almost exclusively in smaller pipe sizes and...

    Contact Now

  • Steel pipe fitting

    Steel pipe fitting

    • Brand: NC

    • Packaging: plywood cases&pallets

    • Supply Ability: 10000Ton/Year

    • Min. Order: 1 Piece/Pieces

    We started doing flange business since 1997 with new factory established in 2002 in Dingxiang town of flange With 280 professional workers 40 000 square meters the annual production capacity is 12 000 000 ton Our products have been exported to South Korea Japan Italy Turkey Germany America Denmark and got good...

    Contact Now

  • Superior quality welding neck (WN) forging flange

    Superior quality welding neck (WN) forging flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Superior quality welding neck WN forging flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself This also reduces high stress concentration at the base of the hub of the weld neck pipe...

    Contact Now

  • Bliand(BL) alloy steel F182F22 forging FF flange

    Bliand(BL) alloy steel F182F22 forging FF flange

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000TON/YEAR

    • Certificate: ISO9001:2015

    Bliand BL alloy steel F182F22 forging FF flange A Blind Flange has no bore and is used to close ends of piping systems A blind flange also permits easy access to a line ones it has been sealed The blind flange is sometimes machined to accept a pipe of the nominal Size to which reduction is being made The reduction can...

    Contact Now

  • Long welding neck RF forging flange A105N

    Long welding neck RF forging flange A105N

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Long welding neck RF forging flange A105N Product description Carbon steel RF LWN flange ANSI B16 5 A105N LWN flange Class 900 Long Welding

    Contact Now

  • Forging machine slip-on RF A182 F11  flange

    Forging machine slip-on RF A182 F11 flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Forging machine slip on RF A182 F11 flange Slip on pipe flanges actually slip over the pipe These pipe flanges are typically machined with an inside diameter slightly larger than the outside diameter of the pipe Slip on pipe flanges are secured to the pipe with a fillet weld at the top and the bottom of the slip on...

    Contact Now

  • ANSI B16.5 Alloy steel  F9 blind flanges

    ANSI B16.5 Alloy steel F9 blind flanges

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 1 Ton

    Alloy Steel F9 Flanges have a higher degree of versatility it is thinner in size and fits well in compact work spaces and is much more economical compared to other flanges Also our Alloy Steel A182 Grade F9 Flanges are cost saving and are reusable and corrosion

    Contact Now

  • Carbon steel A350 weld neck flanges

    Carbon steel A350 weld neck flanges

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 1 Ton

    ASTM A350 also known as ASME SA350 covers several grades of carbon and low alloy steel forged or ring rolled flanges forged fittings and valves intended primarily for low temperature service and requiring notch toughness

    Contact Now

  • Class 600 socket welding RF forging flange

    Class 600 socket welding RF forging flange

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Class 600 socket welding RF forging flange Socket Welding flanges have counter bore is slightly larger than the Outer Diameter of the matching pipe allowing the pipe to be inserted A restriction is built into the bottom of the bore which acts as a shoulder for the pipe to rest on and has the same ID of matching pipe...

    Contact Now

  • Alloy steel lap joint casting flange RF

    Alloy steel lap joint casting flange RF

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Alloy steel lap joint casting flange RF A Lap Joint Flange is usually used in conjunction with Lap Joint Stubs Lap Joint Flanges in carbon or low alloy steel piping systems are best used when frequent dismantling for inspection and cleaning is required The use of Lap Joint Flanges at points where severe bending stress...

    Contact Now

  • Alloy steel WN (welding neck) RTJ flange

    Alloy steel WN (welding neck) RTJ flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Alloy steel WN welding neck RTJ flange Product description Hot forging advantages Alloy steel RTJ WN ANSI B16 47alloy steel flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself This...

    Contact Now

  • B16.5 Semi-finished Forging Flanges

    B16.5 Semi-finished Forging Flanges

    • Brand: NC

    • Packaging: Sea-worthy plywood case

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 1 Ton

    These flanges are semi machined without drilling and serration dimension are as per the standard with extra margin for further machining B16 5 Semi finished Forging Flanges enable clients do final machining at his own workshop accordingly also assures faster delivery and above all is priced lower than fully finished...

    Contact Now

  • Stainless steel SO (slip-on) RF flange

    Stainless steel SO (slip-on) RF flange

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Stainless steel SO slip on RF flange Slip on pipe flanges actually slip over the pipe These pipe flanges are typically machined with an inside diameter slightly larger than the outside diameter of the pipe Slip on pipe flanges are secured to the pipe with a fillet weld at the top and the bottom of the slip on pipe...

    Contact Now

  • Hot forging process of welding neck flange

    Hot forging process of welding neck flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Hot forging process of welding neck flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself This also reduces high stress concentration at the base of the hub of the weld neck pipe...

    Contact Now

  • A350 LF2 LF3 forged carbon steel flanges

    A350 LF2 LF3 forged carbon steel flanges

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 1 Ton

    This specification covers several grades of carbon and low alloy steel forged or ring rolled flanges forged fittings and Valves for low temperature

    Contact Now

  • Non-standard Flanges And Forgings

    Non-standard Flanges And Forgings

    • Brand: NC

    • Packaging: Sea-worthy plywood case/pallet

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 10 Piece/Pieces

    Besides all the standard flanges we also can produce non standard flanges and forgings with clients special request or drawing in different

    Contact Now

  • Alloy Steel ASTM A182 F11 Forged Flanges

    Alloy Steel ASTM A182 F11 Forged Flanges

    • Brand: NC

    • Packaging: Sea-worthy plywood case/pallet

    • Supply Ability: 20,000Ton/Year

    • Min. Order: 10 Piece/Pieces

    Besides carbon steel flanges we also can produce alloy steel flanges and stainless steel flanges Alloy steel material for the forged flanges include ASTM A182 F11 CL1 CL2 A182 F22 CL1 CL3 A182

    Contact Now

  • Forged flange steel properties

    Forged flange steel properties

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Forged flange steel properties Carbon or alloy steel forged flange Class 150 to 2500

    Contact Now

  • Alloy steel welding neck RF flange

    Alloy steel welding neck RF flange

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Certificate: ISO9001:2015

    Alloy steel welding neck RF flange Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange This allows for the transfer of stress from the weld neck pipe flanges to the pipe itself This also reduces high stress concentration at the base of the hub of the weld neck pipe flanges Weld...

    Contact Now

Review

Daniel Vargas

Sep 13, 2020 4

Good deal, highly recommended!
Suji Lee

Sep 12, 2020 5

Excellence! It’s a perfect purchase for me.
Shelly Gonzalez

Sep 08, 2020 5

A very kind seller^ - ^
  • Related Information
we would properly tutorial the purchasers about the application techniques to adopt our items plus the way to select appropriate materials. for Alloy Steel Forging , ASTM Steel Forging , Alloy Steel Flanges , and truthful communication. Welcome all close friends to place trial buy for developing a long-term business relationship.
"Gaining client pleasure is our company's aim without end. We are going to make excellent efforts to create new and top-quality goods, meet your special requirements and provide you with pre-sale, on-sale and after-sale companies for Alloy Steel Forging , ASTM Steel Forging , Alloy Steel Flanges , If any item be of interest for you make sure you let us know. We'll try our best to satisfy your requirements with high quality merchandise the best prices and prompt delivery. Please feel free to contact us at any time. We are going to reply you when we receive your inquiries. You should note that samples are available before we start our business.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List