Communicate with Supplier? Supplier
Xing Ms. Xing
What can I do for you?
Contact Supplier
New Century Machinery Co., Ltd

New Century Machinery Co., Ltd

ncflange@163.com

86-351-5270488

New Century Machinery Co., Ltd

Forged 316 Flanges - manufacturer, factory, supplier from China

(Total 24 Products for Forged 316 Flanges)

  • API 6A stainless steel weld neck flange

    API 6A stainless steel weld neck flange

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000Ton/Year

    • Min. Order: 1 Ton

    ASME ANSI flanges are commonly used in industrial process systems handling water steam air and gas API flanges are manufactured for high strength operating refinery systems with products such as oil and explosive gases The flange standards API 6A and ASME ANSI B16 5 have the same dimensions but the API 6A flanges are...

    Contact Now

  • Long welding neck flange forged

    Long welding neck flange forged

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    Welding neck flange are distinguished from other types by their long tapered hub and gentle transition of thickness in the region of the butt weld joining them to the pipe The long tapered hub provides an important reinforcement of the flange proper from the standpoint of strength and resistance to dishing The welding...

    Contact Now

  • Forged flange non-standard flange

    Forged flange non-standard flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    Non standard flange is usually used for customers special requirement They indicate the application service the data the specification and the drawing Then we produced the special flanges according to their requirement We have manufactured flanges more than 20 years and approved the certificate with API ISO9001 TUV...

    Contact Now

  • 4" blind flange forged flange

    4" blind flange forged flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    Blind flanges are used to blank off the ends of piping valves and pressure vessel opening From the standpoint of internal pressure and bolt loading blind flanges particularly in the larger sizes are the most highly stressed of all flange types We have manufactured flanges more than 20 years and approved the...

    Contact Now

  • DIN 2633 forged flange

    DIN 2633 forged flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    We have manufactured flanges more than 20 years and approved the certificate with API ISO9001 TUV PED Our products have exported to South Korea Janpan Italy American Germany Denmark We can produce all types of flange e g slip on welding neck socket welding threaded lap joint blind orifice long welding neck and...

    Contact Now

  • Threaded flange forged flange

    Threaded flange forged flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    Threaded flanges are confined to special applications Their chief merit lies in the fact that they can be assembled without welding this explains their use in extremely high pressure services particularly at or near atmospheric temperature where alloy steel is essential for strength and where the necessary post weld...

    Contact Now

  • Forged flange Welding neck flange

    Forged flange Welding neck flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    Welding neck flange are distinguished from other types by their long tapered hub and gentle transition of thickness in the region of the butt weld joining them to the pipe The long tapered hub provides an important reinforcement of the flange proper from the standpoint of strength and resistance to dishing The welding...

    Contact Now

  • ASME B16.5 Forged Flange

    ASME B16.5 Forged Flange

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    We have engaged in flanges more than 20 years and approved the certificate with API ISO9001 TUV PED Our products have exported to South Korea Janpan Italy American Germany Denmark We can produce all types of flange e g slip on welding neck socket welding threaded lap joint blind orifice long welding neck and spectacle...

    Contact Now

  • Hot dip galvanizing Flanges

    Hot dip galvanizing Flanges

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    Hot dip galvanized steel HDG is steel that has been dipped in molten zinc in order to produce a rust resistant coating The term galvanizing usually refers to the hot dip method it is also sometimes called zinc hot dipping HDG is a process to produce the flange We have engaged in flanges more than 20 years and approved...

    Contact Now

  • Forged long welding neck flange

    Forged long welding neck flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    Welding neck flange are distinguished from other types by their long tapered hub and gentle transition of thickness in the region of the butt weld joining them to the pipe The long tapered hub provides an important reinforcement of the flange proper from the standpoint of strength and resistance to dishing We have...

    Contact Now

  • Forged socket welding flange

    Forged socket welding flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    Socket welding flanges were initially developed for use on small size high pressure piping When provided with an internal weld their static strength is equal to but their fatigue strength 50 greater than double welding slip on flanges We have manufactured flanges more than 20 years and approved the certificate with...

    Contact Now

  • Forged flange threaded flange

    Forged flange threaded flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    Threaded flanges are confined to special applications Their chief merit lies in the fact that they can be assembled without welding this explains their use in extremely high pressure services particularly at or near atmospheric temperature where alloy steel is essential for strength and where the necessary post weld...

    Contact Now

  • Lap joint Flange Forged Flange

    Lap joint Flange Forged Flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    Lap joint flanges are primarily employed with lap joint stubs the combined initial cost of the two items being approximately one third higher than that of comparable welding neck flanges Their pressure holding ability is little if any better than that of slip on flanges and the fatigue life of the assembly is only one...

    Contact Now

  • Forged flange orifice flange

    Forged flange orifice flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    Orifice flanges are widely used in conjunction with orifice meters for measuring the rate of flow of liquids and gases They are basically the same as standard welding neck and slip on flanges except the provision of radial tapped holes in the flange ring for meter connections and additional bolts to act as jack screws...

    Contact Now

  • Forged Flange Collar Flange

    Forged Flange Collar Flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    Welding neck flange are distinguished from other types by their long tapered hub and gentle transition of thickness in the region of the butt weld joining them to the pipe The long tapered hub provides an important reinforcement of the flange proper from the standpoint of strength and resistance to dishing We have...

    Contact Now

  • Ring Joint Flange Forged

    Ring Joint Flange Forged

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    We have engaged in flanges more than 20 years and approved the certificate with API ISO9001 TUV PED Our products have exported to South Korea Janpan Italy American Germany Denmark We can produce all types of flange e g slip on welding neck socket welding threaded lap joint blind orifice long welding neck and spectacle...

    Contact Now

  • Black Coating Forged Flange

    Black Coating Forged Flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    We have engaged in flanges more than 20 years and approved the certificate with ISO9001 TUV PED API Our products have exported to South Korea Janpan Italy American Germany Denmark We can produce all types of flange e g slip on welding neck socket welding threaded lap joint blind orifice long welding neck and spectacle...

    Contact Now

  • Welding Neck Forged Flanged

    Welding Neck Forged Flanged

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    We have engaged in flanges more than 20 years and approved the certificate with ISO9001 TUV PED API Our products have exported to South Korea Janpan Italy American Germany Denmark We can produce all types of flange e g slip on welding neck socket welding threaded lap joint blind orifice long welding neck and spectacle...

    Contact Now

  • Blank Flange Forged Flange

    Blank Flange Forged Flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    Blank flange can be slid onto a pipe and then welded in place It is made of carbon steel alloy steel and stainless steel The industrial processes come into die forging and machining We can provide a wide range of blank flanges following on standards like ASME B16 5 ASME B16 47 DIN 2634 DIN2630 etc We have manufactured...

    Contact Now

  • Orifice Flanges ANSI B16.36

    Orifice Flanges ANSI B16.36

    • Brand: NC

    • Packaging: PLYWOOD CASES

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    We have engaged in flanges more than 20 years and approved the certificate with API ISO9001 TUV PED Our products have exported to South Korea Janpan Italy American Germany Denmark We can produce all types of flange e g slip on welding neck socket welding threaded lap joint blind orifice long welding neck and spectacle...

    Contact Now

  • Swivel Flange Forged Flange

    Swivel Flange Forged Flange

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    We have engaged in flanges more than 20 years and approved the certificate with API ISO9001 TUV PED Our products have exported to South Korea Janpan Italy American Germany Denmark We can produce all types of flange e g slip on welding neck socket welding threaded lap joint blind orifice long welding neck and spectacle...

    Contact Now

  • Special Forged Flange products

    Special Forged Flange products

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    We have engaged in flanges more than 20 years and approved the certificate with API ISO9001 TUV PED Our products have exported to South Korea Janpan Italy American Germany Denmark We can produce all types of flange e g slip on welding neck socket welding threaded lap joint blind orifice long welding neck and spectacle...

    Contact Now

  • Anchor Flange Forged Products

    Anchor Flange Forged Products

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    Product Deatils

    Contact Now

  • AWWA Standard Flanges Products

    AWWA Standard Flanges Products

    • Brand: NC

    • Packaging: PLYWOOD CASE

    • Supply Ability: 12,000TON/YEAR

    • Min. Order: 1 Ton

    We have engaged in flanges over 20years and approved the certificate with ISO9001 TUV PED API Our products have exported to South Korea Janpan Italy American Germany Denmark We can produce all types of flange e g slip on welding neck socket welding threaded lap joint blind orifice long welding neck and spectacle blind...

    Contact Now

Review

Anastasios Andreadis

Jan 27, 2021 5

Great Forged 316 Flanges . Would buy again.
Florin Pirvulescu

Jan 26, 2021 5

great shipment! awesome product!glad to working with NC company!
Lampros Huang

Jan 07, 2021 5

Excellent seller and a good figments!
As for aggressive charges, we believe that you will be searching far and wide for anything that can beat us. We could state with absolute certainty that for such excellent at such costs we've been the lowest around for Forged 316 Flanges , Forged Flanges , Forged Flange , We sincerely welcome overseas buyers to consult for that long-term cooperation as well as the mutual progress.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List

Home

Phone

About Us

Inquiry